2011 Utilimaster Aeromaster Recalls
All 2011 Utilimaster Aeromaster recalls can be found below. It is important to us to provide a complete resource for recall information, so if you know of any additional related recalls, please contact us to let us know.April 16th, 2014
Recalled Component
ELECTRICAL SYSTEM
ELECTRICAL SYSTEM
Recall Date
April 16th, 2014
April 16th, 2014
Units Effected
3,200
3,200
NHTSA Campaign Number: 14V187000
Manufacturer: UTILIMASTER CORPORATION
Manufactured Begin Date: January 1st, 2010
Manufactured End Date: March 31st, 2014
Date of Owner Notification: May 23rd, 2014
Defect Summary:
Spartan Motors, Inc. (Spartan) is recalling certain model year 2010-2014 Utilimaster Aeromaster walk-in vans manufactured January 1, 2010, through March 19, 2014. The affected vehicles may have a loose power connection at the power stud terminal block. Consequence Summary:
A loose power stud may cause arcing or high heat on the terminal, increasing the risk of a fire. Corrective Summary:
Spartan will notify owners, and dealers will inspect and properly tighten the electrical connection, as necessary, free of charge. The recall began on May 23, 2014. Owners may contact Spartan at 1-517-543-6400. Recall Notes:
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
February 29th, 2012
Recalled Component
POWER TRAIN:AUTOMATIC TRANSMISSION:GEAR POSITION INDICATION (PRNDL)
POWER TRAIN:AUTOMATIC TRANSMISSION:GEAR POSITION INDICATION (PRNDL)
Recall Date
February 29th, 2012
February 29th, 2012
Units Effected
679
679
NHTSA Campaign Number: 12V078000
Manufacturer: UTILIMASTER CORPORATION
Date of Owner Notification: March 16th, 2012
Defect Summary:
UTILIMASTER IS RECALLING CERTAIN MODEL YEAR 2011-2012 AEROMASTER VEHICLES MANUFACTURED FROM MARCH 11, 2009, THROUGH DECEMBER 3, 2012. THE TRANSMISSION GEAR SHIFTER?S CABLE MAY BREAK AT THE ATTACHMENT TO THE TRANSMISSION CONTROL SELECTOR ARM ASSEMBLY MOUNTED ON THE STEERING COLUMN. IF THE CABLE BREAKS, THE TRANSMISSION GEAR INDICATOR IN THE ?PRNDL? DISPLAY IN THE INSTRUMENT PANEL WILL REMAIN IN THE FIRST GEAR POSITION REGARDLESS OF THE GEAR SELECTED. Consequence Summary:
AN INCORRECT GEAR INDICATION IN THE INSTRUMENT PANEL MAY PREVENT THE DRIVER FROM KNOWING IF THEY ARE IN PARK OR REVERSE, INCREASING THE RISK OF A CRASH. Corrective Summary:
UTILIMASTER WILL NOTIFY OWNERS, AND DEALERS WILL REPLACE THE TRANSMISSION SELECTOR ARM ASSEMBLY AND THE TRANSMISSION GEAR SHIFTER?S CABLE ASSEMBLY, FREE OF CHARGE. THE SAFETY RECALL BEGAN ON MARCH 16, 2012. OWNERS MAY CONTACT UTILIMASTER AT 1-517-543-6400. Recall Notes:
CUSTOMERS MAY CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY: 1-800-424-9153); OR GO TO HTTP://WWW.SAFERCAR.GOV.
January 3rd, 2012
Recalled Component
STRUCTURE:BODY:DOOR
STRUCTURE:BODY:DOOR
Recall Date
January 3rd, 2012
January 3rd, 2012
Units Effected
9,861
9,861
NHTSA Campaign Number: 11V606000
Manufacturer: UTILIMASTER CORPORATION
Manufactured Begin Date: September 1st, 2009
Manufactured End Date: December 22nd, 2011
Date of Owner Notification: November 16th, 2012
Defect Summary:
Certain Utilimaster model year 2009 through 2011 Aeromaster and one model year 2011 Reach work trucks manufactured from September 1, 2009, through December 22, 2011, fail to comply with the requirements of Federal Motor Vehicle Safety Standard No. 206, "Door Locks and Door Retention Components." Consequence Summary:
Certain work trucks are not equipped with either a primary door latch system or a door latch system with a fully latched position and a door closure warning system as required by FMVSS 206. Without a door closure warning system, the driver may not be aware that the door is not fully latched. The door could partially open without warning and the driver may be at an increased risk of injuries in the event of a crash. Corrective Summary:
Utilimaster will notify owners, and dealers will repair the vehicles free of charge. The safety recall began on November 16, 2012. Owners may contact Utilimaster at 1-800-582-3454. Recall Notes:
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
January 3rd, 2012
Recalled Component
LATCHES/LOCKS/LINKAGES:DOORS:LATCH
LATCHES/LOCKS/LINKAGES:DOORS:LATCH
Recall Date
January 3rd, 2012
January 3rd, 2012
Units Effected
9,861
9,861
NHTSA Campaign Number: 11V606000
Manufacturer: UTILIMASTER CORPORATION
Manufactured Begin Date: September 1st, 2009
Manufactured End Date: December 22nd, 2011
Date of Owner Notification: November 16th, 2012
Defect Summary:
Certain Utilimaster model year 2009 through 2011 Aeromaster and one model year 2011 Reach work trucks manufactured from September 1, 2009, through December 22, 2011, fail to comply with the requirements of Federal Motor Vehicle Safety Standard No. 206, "Door Locks and Door Retention Components." Consequence Summary:
Certain work trucks are not equipped with either a primary door latch system or a door latch system with a fully latched position and a door closure warning system as required by FMVSS 206. Without a door closure warning system, the driver may not be aware that the door is not fully latched. The door could partially open without warning and the driver may be at an increased risk of injuries in the event of a crash. Corrective Summary:
Utilimaster will notify owners, and dealers will repair the vehicles free of charge. The safety recall began on November 16, 2012. Owners may contact Utilimaster at 1-800-582-3454. Recall Notes:
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Recall Comments
Be the first to add a comment!