2012 Spartan K3 Recalls

All 2012 Spartan K3 recalls can be found below. It is important to us to provide a complete resource for recall information, so if you know of any additional related recalls, please contact us to let us know.

May 17th, 2016

NHTSA Campaign Number: 16V313000
Manufacturer: Spartan Motors USA
Manufacturer Campaign Number: 16014
Manufactured Begin Date: September 21st, 2006
Manufactured End Date: March 23rd, 2015
Date of Owner Notification: June 23rd, 2016

Defect Summary:
Spartan Motors (Spartan) is recalling certain model year 2007-2015 Spartan K3 and MM motorhome chassis manufactured September 21, 2006, to March 23, 2015. In the affected vehicles, the flexible exhaust tube may tear allowing hot exhaust to blow against other components or materials.

Consequence Summary:
If hot exhaust gas contacts other components or materials, it can increase the risk of a fire.

Corrective Summary:
Spartan will notify the motorhome manufacturers that purchased the affected chassis, and Spartan dealers will inspect the alignment of the tubes, correcting them and replacing any that are torn. These repairs will be performed free of charge. The recall began on June 23, 2016. Owners may contact Spartan customer service at 1-517-543-6400. Spartan's number for this recall is 16014. Note: This recall supersedes 15V-554.

Recall Notes:
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

September 3rd, 2013

NHTSA Campaign Number: 13V392000
Manufacturer: Spartan Motors USA
Manufacturer Campaign Number: 12008
Date of Owner Notification: September 17th, 2013

Defect Summary:
Spartan Motor Chassis, Inc. (Spartan) is recalling certain model year 2009-2012 MM, 2011-2014 K2, and 2010-2012 K3 motor home chassis. Due to contact with the steering relay rod, the ABS modulator valve may fracture resulting in air not being applied to the affected wheel end.

Consequence Summary:
This may increase stopping distance of the vehicle or cause the vehicle to pull to one side. Either condition increases the risk of a crash.

Corrective Summary:
Spartan will notify owners and dealers will reorient the ABS modulator valve and install spacers for additional clearance, free of charge. The recall began on September 17, 2013. Owners may contact Spartan at 1-517-543-6400. spartan's recall campaign number is 12008.

Recall Notes:
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

June 10th, 2013

NHTSA Campaign Number: 13V242000
Manufacturer: Spartan Motors USA
Manufacturer Campaign Number: 13-009
Manufactured Begin Date: March 2nd, 2012
Manufactured End Date: July 30th, 2012
Date of Owner Notification: July 8th, 2013

Defect Summary:
Spartan Motors, Inc. (Spartan) is recalling certain model year 2012-2013 K2, K3, and MM motor homes manufactured March 2, 2012, through July 30, 2012 and equipped with a 1660 independent front suspension supplied by Reyco Granning. The motor homes may have incorrect wheel bearings installed in the front suspension.

Consequence Summary:
Incorrect wheel bearings may cause the vehicle to pull to one side and with continued use, there is a risk of a fire starting at the wheel.

Corrective Summary:
Spartan will notify owners and dealers will inspect the bearings and replace them, as needed, free of charge. The recall began on July 8, 2013. Owners may contact Spartan at 1-517-543-6400. Spartan's campaign number is 13-009.

Recall Notes:
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

August 18th, 2011

NHTSA Campaign Number: 11V425000
Manufacturer: Spartan Motors USA
Manufacturer Campaign Number: 11022
Manufactured Begin Date: September 29th, 2010
Manufactured End Date: June 20th, 2011
Date of Owner Notification: October 10th, 2011

Defect Summary:
SPARTAN IS RECALLING CERTAIN MODEL YEAR 2010, 2011, AND 2012 RECREATIONAL VEHICLES, MODELS MM, K2, K3, BUS, FURION, GLADIATOR, AND METRO STAR, MANUFACTURED FROM SEPTEMBER 29, 2010, THROUGH JUNE 20, 2011, EQUIPPED WITH A CUMMINS ISB, ISC, ISL, OR ISX DIESEL ENGINE. THE V-BAND CLAMP ASSEMBLY, PART NUMBERS Q187684, Q187685, AND Q187686, USED TO CONNECT THE INLET AND OUTLET CONE SECTIONS TO THE DIESEL OXIDATION CATALYST (DOC)/DIESEL PARTICULATE FILTER (DPF) INCLUDE A T-BOLT WHICH CAN FRACTURE AND FAIL WHEN SUBJECTED TO STRESS OR LOAD. A FRACTURE OR FAILURE OF THE T-BOLT MAY CAUSE THE CLAMP TO LOOSEN AND THE INLET OR OUTLET SECTIONS ATTACHED TO THE DOC/DPF HOUSING TO DISCONNECT.

Consequence Summary:
IF THE INLET OR OUTLET SECTIONS DISCONNECT, HOT EXHAUST GASES CAN VENT PRIOR TO EXITING THE TAILPIPE, CREATING THE RISK OF COMBUSTION AND A FIRE. IF BOTH CLAMPS FAIL, THERE IS A RISK IN SOME APPLICATIONS THAT THE DOC/DPF HOUSING MAY DETACH COMPLETELY, CREATING A ROAD HAZARD.

Corrective Summary:
SPARTAN IS WORKING WITH CUMMINS TO IDENTIFY AND NOTIFY OWNERS OF THE RECALL CAMPAIGN. REPAIRS WILL BE PERFORMED BY AUTHORIZED CUMMINS DEALERS FREE OF CHARGE. THE SAFETY RECALL BEGAN ON OCTOBER 10, 2011. OWNERS MAY CONTACT CUMMINS AT 1-812-377-5000 OR SPARTAN AT 1-800-543-5008 - OPTION 5.

Recall Notes:
CUMMINS RECALL CAMPAIGN NUMBER IS C1154.SPARTAN'S RECALL CAMPAIGN NUMBER IS 11022.OWNERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO HTTP://WWW.SAFERCAR.GOV .

August 15th, 2011

NHTSA Campaign Number: 11V412000
Manufacturer: Spartan Motors USA
Manufacturer Campaign Number: 11018
Manufactured Begin Date: January 28th, 2011
Manufactured End Date: June 28th, 2011
Date of Owner Notification: September 12th, 2013

Defect Summary:
Spartan Motors Chassis, Inc. (Spartan Chassis) is recalling certain 2011 SU and 2011 through 2012 model year MM, K2, and K3 recreational vehicle chassis manufactured from January 28, 2011, through June 28, 2011, equipped with air gauges supplied by Ametek. An incorrect value may have been used in the formula for calculating the sweep angle of the dial. This may have resulted in the accuracy of the gauge varying as much as eleven percent from the cutout pressure as opposed to the maximum allowable of +/- seven percent. Consequently, these chassis fail to conform to the requirements of Federal Motor Vehicle Safety Standard No. 121, "Air Brake Systems."

Consequence Summary:
In a condition where constant braking may be necessary, the air systems may deplete sooner than expected. This could cause the application of the spring brake without warning and may result in a vehicle crash.

Corrective Summary:
Spartan Chassis will notify owners and replace the affected guages with compliant ones, free of charge. The recall began on September 12, 2013. Owners may contact Spartan at 1-800-543-4277 - Option 1. Spartan's campagn number is 11018.

Recall Notes:
In July 2011, Spartan petitioned NHTSA that the noncompliance was inconsequential to motor vehicle safety.In August 2013, NHTSA denied the petition and instructed Spartan to conduct a recall campaign.Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Recall Comments

No comments have been posted.
Be the first to add a comment!