2015 Pierce Enforcer Recalls

All 2015 Pierce Enforcer recalls can be found below. It is important to us to provide a complete resource for recall information, so if you know of any additional related recalls, please contact us to let us know.

August 5th, 2016

NHTSA Campaign Number: 16V585000
Manufacturer: PIERCE MANUFACTURING
Manufacturer Campaign Number: 74B277
Manufactured Begin Date: June 29th, 2015
Manufactured End Date: June 30th, 2016
Date of Owner Notification: September 2nd, 2016

Defect Summary:
Pierce Manufacturing (Pierce) is recalling certain model year 2015-2016 Arrow, Dash, Enforcer, Impel, Quantum, Saber, and Velocity fire trucks manufactured June 29, 2015, to June 30, 2016. The affected vehicles may be equipped with certain C20 and C21 split-shaft transmissions from Waterous. This transmission sends power to the wheels of an emergency response vehicle or power to an add-on unit such as a water pump used for fighting fires. A component within the shift unit may be damaged and as a result, the operator may not be able to switch the power output.

Consequence Summary:
If the power output cannot be changed, once the fire truck arrives at the scene, it may not be able to pump water to aid in extinguishing the fire, increasing the risk of injury.

Corrective Summary:
Piece will notify owners, and dealers will remove the shift unit assembly and replace the clevis pin and retaining rings, free of charge. The recall began on September 2, 2016. Owners may contact Pierce customer service at 1-888-974-3723. Pierce's number for this recall is 74B277.

Recall Notes:
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

July 22nd, 2016

NHTSA Campaign Number: 16V551000
Manufacturer: PIERCE MANUFACTURING
Manufacturer Campaign Number: 74B276
Manufactured Begin Date: April 12th, 2016
Manufactured End Date: May 31st, 2016
Date of Owner Notification: July 26th, 2016

Defect Summary:
Pierce Manufacturing (Pierce) is recalling certain model year 2015-2016 Enforcer, Impel, and Velocity vehicles manufactured April 12, 2016, to May 31, 2016, equipped with aerial devices. The affected vehicles may have a plastic plug installed in an unused port in the hydraulic pump for the aerial device. This plastic plug may separate from the pump resulting in a hydraulic fluid leak, potentially disabling the aerial device.

Consequence Summary:
The inoperable aerial device can increase the risk of injury if the operator needs to move away from a hazardous situation or it may impede the safety mission.

Corrective Summary:
Pierce has notified owners, and dealers will inspect the vehicles and replace the plastic plug with a metal plug, as necessary, free of charge. The recall began on July 26, 2016. Owners may contact Pierce customer service at 1-888ΓΌ-974-3723. Pierce's number for this recall is 74B276.

Recall Notes:
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

June 1st, 2016

NHTSA Campaign Number: 16V390000
Manufacturer: PIERCE MANUFACTURING
Manufacturer Campaign Number: 74B272
Manufactured Begin Date: August 4th, 2015
Manufactured End Date: April 24th, 2016
Date of Owner Notification: June 16th, 2016

Defect Summary:
Pierce Manufacturing (Pierce) is recalling certain model year 2015-2016 Arrow XT, Enforcer, Impel, Quantum, Saber, and Velocity emergency vehicles manufactured August 4, 2015, to August 24, 2016, equipped with pumps to provide pressurized water to aid in fighting fires. These pumps have 6" intake strainers that may have been improperly soldered during production and, as a result, the strainers may come apart during use, allowing parts of the strainer and debris to enter the pump, possibly damaging the pump.

Consequence Summary:
If the strainer and/or debris enters the pump, and the operator is forced to shut down the pump, reducing firefighting effectiveness, there could be an increased risk of injury.

Corrective Summary:
Pierce will notify owners to check the strainer for missing solder at the joints. Any strainers missing solder will be replaced, free of charge. The recall began on June 16, 2016. Owners may contact Pierce customer service at 1-888-974-3723 or Hale Products Customer Service Center at 1-800-533-3569. Pierce's number for this recall is 74B272.

Recall Notes:
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

March 10th, 2016

NHTSA Campaign Number: 16V148000
Manufacturer: PIERCE MANUFACTURING
Manufacturer Campaign Number: 74B269
Manufactured Begin Date: March 3rd, 2014
Manufactured End Date: February 3rd, 2016
Date of Owner Notification: April 11th, 2016

Defect Summary:
Pierce Manufacturing (Pierce) is recalling certain model year 2014-2016 Enforcer and Saber emergency vehicles manufactured from March 3, 2014, through February 3, 2016. The clamps on the heater hose may have been improperly installed allowing engine coolant to leak into the passenger compartment.

Consequence Summary:
If coolant leaks into the passenger compartment, it may contact electrical components causing a shorting of circuits and a loss of function of features controlled by those circuits, including loss of power to vehicle which may result in a stall and increase the risk of a crash. The hot coolant may also contact occupants and possibly cause burn injuries.

Corrective Summary:
Pierce will notify owners, and dealers will inspect the hose clamp installation. Any improperly installed clamps will be corrected free of charge. The recall began on April 11, 2016. Owners may contact Pierce customer service at 1-888-974-3723. Pierce's number for this recall is 74B269.

Recall Notes:
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

October 26th, 2015

NHTSA Campaign Number: 15V706000
Manufacturer: PIERCE MANUFACTURING
Manufacturer Campaign Number: 74B266
Manufactured Begin Date: November 20th, 2014
Manufactured End Date: September 29th, 2015
Date of Owner Notification: November 12th, 2015

Defect Summary:
Pierce Manufacturing (Pierce) is recalling certain model year 2015-2016 Arrow XT, Velocity, Enforcer, and Saber vehicles manufactured November 20, 2014, to September 29, 2015. The affected vehicles are equipped with front drive axles whose hex nuts on the flange yoke may not have been properly tightened.

Consequence Summary:
If the hex nuts are not tightened to specification, the driveshaft may disconnect from the drive axle, resulting in a loss of propulsion and increasing the risk of a crash.

Corrective Summary:
Pierce will notify owners, and dealers will inspect the hex nuts, tightening them as necessary, free of charge. The recall began on November 12, 2015. Owners may contact Pierce customer service at 1-888-974-3723. Pierce's number for this recall is 74B266.

Recall Notes:
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

August 13th, 2015

NHTSA Campaign Number: 15V516000
Manufacturer: PIERCE MANUFACTURING
Manufacturer Campaign Number: 74B265
Manufactured Begin Date: November 3rd, 2014
Manufactured End Date: July 31st, 2015
Date of Owner Notification: September 15th, 2015

Defect Summary:
Pierce Manufacturing (Pierce) is recalling certain model year 2014-2015 Pierce Arrow XT, Dash CF, Enforcer, Quantum, and Velocity emergency vehicles manufactured from November 3, 2014, through July 31, 2015. The affected vehicles have a driveshaft that may bend or twist possibly causing it disconnect.

Consequence Summary:
If the driveshaft disconnects from the vehicle, the vehicle would have a loss of drive, disabling it on the roadway and preventing the vehicle from responding to an emergency. Additionally, portions of the driveshaft could become a road hazard. These scenarios may increase the risk of a crash.

Corrective Summary:
Pierce has notified owners, and dealers will install a stronger driveshaft, free of charge. The recall began on September 15, 2015. Owners may contact Pierce customer service at 1-888-974-3723. Pierce's number for this recall is 74B265.

Recall Notes:
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

March 25th, 2015

NHTSA Campaign Number: 15V174000
Manufacturer: PIERCE MANUFACTURING
Manufactured Begin Date: December 4th, 2014
Manufactured End Date: March 23rd, 2015
Date of Owner Notification: April 8th, 2015

Defect Summary:
Pierce Manufacturing (Pierce) is recalling certain model year 2015 Saber, Enforcer, Impel, and Velocity vehicles manufactured December 4, 2014, to March 23, 2015. The rear axle cast iron leaf spring spacer block may crack and fracture.

Consequence Summary:
If the leaf spring spacer block fractures, the pieces may become a road hazard. If the entire spacer block separates from the vehicle, the alignment of the rear axle may suddenly shift. Either condition could increase the risk of a crash.

Corrective Summary:
Pierce will notify owners, and dealers will replace the cast iron spring spacer block with a machined steel spring spacer block, free of charge. The recall began on March 23, 2015. Owners may contact Pierce customer service at 1-888-974-3723.

Recall Notes:
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Recall Comments

No comments have been posted.
Be the first to add a comment!