2006 Hino Nd8j Recalls

---

NHTSA Campaign Number: 14V791000
Manufacturer: HINO MOTORS SALES U.S.A., INC.
Manufacturer Campaign Number: A9970
Manufactured Begin Date: August 26th, 2003
Manufactured End Date: May 14th, 2014
Date of Owner Notification: February 2nd, 2015

Defect Summary:
Hino Motor Sales U.S.A., Inc. (Hino) is recalling certain model year 2005-2015 Hino ND8J, NE8J, and NF8J trucks manufactured August 26, 2003, to May 14, 2014. In the affected vehicles, components of the parking brake handle assembly may wear, resulting in either the parking brake unexpectedly releasing when engaged or preventing the parking brake from fully engaging.

Consequence Summary:
Either parking brake condition may result in the vehicle rolling unexpectedly, increasing the risk of a crash.

Corrective Summary:
Hino will notify owners, and dealers will install a new parking brake lever that contains a two-way damper and a roller at the cable joining pin, free of charge. The recall began February 2, 2015. Owners may contact Hino customer service at 1-248-699-9330. Hino's number for this recall is A9970. Note: This recall supersedes 13V-614.

Recall Notes:
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

---

NHTSA Campaign Number: 12V555000
Manufacturer: HINO MOTORS SALES U.S.A., INC.
Manufacturer Campaign Number: A8310
Manufactured Begin Date: August 18th, 2003
Manufactured End Date: November 16th, 2011
Date of Owner Notification: January 17th, 2013

Defect Summary:
Hino is recalling certain model year 2005 through 2013 medium duty trucks, models NA6J, NB6J, NC6J, ND8J, NE8J, NJ8J, NF8J, and NV8J, manufactured from August 18, 2003, through November 16, 2011. Over time, the main B+ circuit from the battery to the starter could potentially short to ground due to wear that accumulates as a result of interference between the B+ circuit and its convoluted tubing sheath.

Consequence Summary:
If the B+ circuit shorts to ground, it may lead to a fire.

Corrective Summary:
Hino will notify owners, and dealers will repair the vehicles free of charge. The recall began on January 17, 2013. Owners may contact Hino at 1-248-699-9390.

Recall Notes:
Hino's recall campaign number is A8310.Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

---

NHTSA Campaign Number: 12V555000
Manufacturer: HINO MOTORS SALES U.S.A., INC.
Manufacturer Campaign Number: A8310
Manufactured Begin Date: August 18th, 2003
Manufactured End Date: November 16th, 2011
Date of Owner Notification: January 17th, 2013

Defect Summary:
Hino is recalling certain model year 2005 through 2013 medium duty trucks, models NA6J, NB6J, NC6J, ND8J, NE8J, NJ8J, NF8J, and NV8J, manufactured from August 18, 2003, through November 16, 2011. Over time, the main B+ circuit from the battery to the starter could potentially short to ground due to wear that accumulates as a result of interference between the B+ circuit and its convoluted tubing sheath.

Consequence Summary:
If the B+ circuit shorts to ground, it may lead to a fire.

Corrective Summary:
Hino will notify owners, and dealers will repair the vehicles free of charge. The recall began on January 17, 2013. Owners may contact Hino at 1-248-699-9390.

Recall Notes:
Hino's recall campaign number is A8310.Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

---

NHTSA Campaign Number: 08V195000
Manufacturer: HINO MOTORS SALES U.S.A., INC.
Manufacturer Campaign Number: A5850
Manufactured End Date: September 27th, 2007
Date of Owner Notification: September 22nd, 2008

Defect Summary:
HINO IS RECALLING 16,805 MY 2005-2008 NA6J, NB6J, NC6J, ND8J, NE8J, NJ8J, AND NV8J TRUCKS. THE TWO VERTICAL RIGHT/LEFT SIDE FRONT SPRING BRACKET BOLTS WERE NOT TIGHTENED PROPERLY DURING THE ASSEMBLY PROCESS. THIS MAY CAUSE INCREASED STRESS ON THE SPRING BRACKET WHICH CAN LEAD TO CRACKING OF THE BRACKET.

Consequence Summary:
THIS COULD REDUCE STEERING CONTROL INCREASING THE RISK OF A CRASH.

Corrective Summary:
DEALERS WILL REPLACE THE VERTICAL FRONT SPRING BRACKET ATTACHMENT BOLTS ON RIGHT/LEFT HANGER BRACKETS AND RE-TORQUE ALL ASSOCIATED BOLTS FREE OF CHARGE. THE RECALL BEGAN ON SEPTEMBER 8, 2008. OWNERS MAY CONTACT HINO AT 248-699-9300.

Recall Notes:
HINO RECALL NO. A5850.CUSTOMERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO HTTP://WWW.SAFERCAR.GOV.

---

NHTSA Campaign Number: 07V208000
Manufacturer: HINO MOTORS SALES U.S.A., INC.
Manufacturer Campaign Number: A5340
Manufactured Begin Date: October 22nd, 2003
Manufactured End Date: April 2nd, 2007
Date of Owner Notification: April 25th, 2007

Defect Summary:
ON CERTAIN TRUCKS EQUIPPED WITH BANDO BELT TENSIONER, CORROSION OR RUST MAY DEVELOP ON THE TENSIONER SPINDLE OR BUSHING CAUSING THE AUTO TENSIONER TO BECOME STIFF OR BIND. THIS CAN CAUSE THE DRIVE BELT TO SUDDENLY COME OFF OR THE AUTO TENSIONER MOUNTING BOLTS COULD SUDDENLY BREAK.

Consequence Summary:
IF THE DRIVE BELT COMES OFF, THE ALTERNATOR WARNING LAMP WILL ILLUMINATE. IF THE WARNING IS IGNORED, THIS CONDITION COULD ULTIMATELY RESULT IN A LOSS OF VEHICLE POWER (ENGINE STALL) INCREASING THE RISK OF A CRASH.

Corrective Summary:
DEALERS WILL REPLACE THE AUTO TENSIONER, INSTALL UPGRADED MOUNTING BOLTS, AND REPLACE THE ACCESSORY DRIVE BELT FREE OF CHARGE. THE RECALL BEGAN ON APRIL 25, 2007. OWNERS MAY CONTACT HINO MOTORS AT 248-648-6430. NOTE: THIS RECALL SUPERSEDES A PREVIOUS CAMPAIGN (PLEASE SEE 06V157).

Recall Notes:
HINO RECALL NO. A5340.CUSTOMERS MAYALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO HTTP://WWW.SAFERCAR.GOV.

---

NHTSA Campaign Number: 06V483000
Manufacturer: HINO MOTORS SALES U.S.A., INC.
Manufacturer Campaign Number: M0070
Manufactured Begin Date: March 1st, 2006
Manufactured End Date: June 14th, 2006
Date of Owner Notification: December 4th, 2006

Defect Summary:
ON CERTAIN VEHICLES, DURING THE STAMPING PROCESS, SOME CROSSMEMBERS WERE MANUFACTURED WITH A DEFORMATION TO THE LOWER CORNERS DUE TO EXCESSIVE WEAR OF THE STAMPING DIE. OVER TIME, IF THIS CONDITION WERE IGNORED, THE STRUCTURAL INTEGRITY OF THE CROSSMEMBERS COULD BE COMPROMISED WHICH COULD RESULT IN A LOSS OF BRAKING ABILITY, SEPARATION OF THE PROPELLER SHAFT AND/OR A LOSS OF REAR WARNING LAMPS.

Consequence Summary:
ANY OF THESE OCCURRENCES COULD RESULT IN A CRASH.

Corrective Summary:
DEALERS WILL INSPECT, CORRECT, AND REPLACE THE CROSSMEMBERS. THE RECALL BEGAN ON DECEMBER 4, 2006. OWNERS MAY CONTACT HINO AT 1-248-648-6400.

Recall Notes:
HINO RECALL NO. M0070.CUSTOMERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO HTTP://WWW.SAFERCAR.GOV.

---

NHTSA Campaign Number: 06V360000
Manufacturer: HINO MOTORS SALES U.S.A., INC.
Manufacturer Campaign Number: HS001
Manufactured Begin Date: June 3rd, 2005
Manufactured End Date: August 30th, 2006
Date of Owner Notification: September 15th, 2006

Defect Summary:
ON CERTAIN CAB AND CHASSIS TRUCKS THAT WERE TRANSPORTED TO THE SELLING LOCATION OR BODY COMPANY USING A DECKING SYSTEM (VEHICLES STACKED ON THE REAR OF THE LEAD TRUCK FOR TRANSPORT), THE AIR BRAKE LINES MAY BE DISCONNECTED SO THAT THE BRAKING SYSTEMS CAN BE TIED TOGETHER WITH THE OTHER VEHICLES. WHEN THESE VEHICLES ARRIVE AT THEIR DESTINATION, THE AIR BRAKE LINES ARE RECONNECTED. THESE RECONNECTIONS WERE NOT ALWAYS BEING TIGHTENED TO THE PROPER TORQUE. ALSO, DURING THIS RECONNECTION PROCESS, SOME OF THE ABS WIRING CLIPS HAD BEEN REMOVED AND NOT REINSTALLED.

Consequence Summary:
LOOSE AIR BRAKE LINES CAN BECOME DISCONNECTED OR LEAK WHICH COULD CAUSE A DECREASE IN BRAKING ABILITY OR RESULTING IN APPLICATION OF THE PARKING BRAKE WITHOUT IT BEING ACTIVATED. THIS COULD RESULT IN A CRASH. ALSO IF THE DRIVE SHAFT BOLTS ARE LEFT LOOSE, THE DRIVE SHAFT COULD BECOME DISENGAGED MAKING THE VEHICLE IMMOVABLE. IF THE ABS SENSORS ARE NOT SECURED PROPERLY USING THE CORRECT CLIPS, THE ABS SENSORS COULD GO OUT OF ALIGNMENT.

Corrective Summary:
DEALERS WILL INSPECT THE AIR BRAKE LINES, DRIVE SHAFT BOLTS AND ABS SENSOR CLIPS AND TIGHTEN AND REPAIR IF NECESSARY. THE RECALL BEGAN ON SEPTEMBER 15, 2006. OWNERS MAY CONTACT HINO AT 1-248-648-6430.

Recall Notes:
HINO RECALL NO. HS001.CUSTOMERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO HTTP://WWW.SAFERCAR.GOV.

---

NHTSA Campaign Number: 06V157000
Manufacturer: HINO MOTORS SALES U.S.A., INC.
Manufacturer Campaign Number: A4790
Manufactured Begin Date: October 22nd, 2003
Manufactured End Date: June 10th, 2005
Date of Owner Notification: May 2nd, 2006

Defect Summary:
ON CERTAIN TRUCKS EQUIPPED WITH BANDO BELT TENSIONER, CORROSION OR RUST MAY DEVELOP ON THE TENSIONER SPINDLE OR BUSHING CAUSING THE AUTO TENSIONER TO BECOME STIFF OR BIND. THIS CAN CAUSE THE DRIVE BELT TO SUDDENLY COME OFF OR THE AUTO TENSIONER MOUNTING BOLTS COULD SUDDENLY BREAK.

Consequence Summary:
IF THE DRIVE BELT COMES OFF, THE ALTERNATOR WARNING LAMP WILL ILLUMINATE. IF THE WARNING IS IGNORED, THIS CONDITION COULD ULTIMATELY RESULT IN A LOSS OF VEHICLE POWER (ENGINE STALL) INCREASING THE RISK OF A CRASH.

Corrective Summary:
DEALERS WILL REPLACE THE AUTO TENSIONER, INSTALL UPGRADED MOUNTING BOLTS, AND REPLACE THE ACCESSORY DRIVE BELT FREE OF CHARGE. THE RECALL BEGAN ON MAY 2, 2006. OWNERS MAY CONTACT HINO MOTORS AT 248-648-6430. THIS CAMPAIGN HAS BEEN SUPERSEDED - PLEASE SEE 07V208.

Recall Notes:
HINO MOTORS RECALL NO. A4790.CUSTOMERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO HTTP://WWW.SAFERCAR.GOV.

---

NHTSA Campaign Number: 05V492000
Manufacturer: HINO MOTORS SALES U.S.A., INC.
Manufacturer Campaign Number: M0040
Manufactured Begin Date: April 1st, 2005
Manufactured End Date: August 1st, 2005
Date of Owner Notification: October 27th, 2005

Defect Summary:
ON CERTAIN TRUCKS, THE BOLTS THAT HOLD THE BATTERY BOX AND BRACKET IN PLACE MAY NOT HAVE BEEN PROPERLY TORQUED AT THE TIME OF ASSEMBLY.

Consequence Summary:
THE BATTERY BOX COULD BECOME LOOSE AND POSSIBLY FALL RESULTING IN A CRASH WITHOUT WARNING.

Corrective Summary:
DEALERS WILL INSPECT AND RETORQUED ALL BOLTS. THE RECALL BEGAN ON OCTOBER 27, 2005. OWNERS MAY CONTACT HINO AT 248-648-6430.

Recall Notes:
HINO RECALL NO. M0040.CUSTOMERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO HTTP://WWW.SAFERCAR.GOV.