2006 Hino Nd6j Recalls

---

NHTSA Campaign Number: 06V169000
Manufacturer: HINO MOTORS SALES U.S.A., INC.
Manufacturer Campaign Number: M0050
Manufactured Begin Date: October 1st, 2004
Manufactured End Date: March 25th, 2006
Date of Owner Notification: May 12th, 2006

Defect Summary:
ON CERTAIN TRUCKS, DURING ASSEMBLY, THE DRAG LINK ATTACHMENT NUTS AT THE PITMAN ARM AND STEERING ARM MAY HAVE BEEN INCORRECTLY TORQUED. RESIDUAL GREASE AND PAINT WHICH WAS APPLIED AS A RUST INHIBITOR ON THE STEERING ARM MAY HAVE CONTRIBUTED TO A LOSS OF TORQUE AFTER ASSEMBLY.

Consequence Summary:
INCREASED WEAR FOR THE DRAGLINK CONNECTIONS CAN OCCUR CREATING A NOTICEABLE INCREASE IN THE AMOUNT OF STEERING WHEEL FREE PLAY. IF THIS CONDITION WAS IGNORED, A LOSS OF STEERING CONTROL OF THE VEHICLE COULD OCCUR WHICH COULD RESULT IN A CRASH.

Corrective Summary:
DEALERS WILL INSPECT THE STEERING ARM TIGHTNESS AND REMOVE ALL GREASE AND PAINT FROM THE STEERING ARMS AND RETORQUE THE DRAGLINK ATTACHMENT NUTS AT THE STEERING ARM AND PITMAN ARM. THE RECALL BEGAN ON MAY 12, 2006. OWNERS MAY CONTACT HINO AT 1-248-648-6430.

Recall Notes:
HINO RECALL NO. M0050.CUSTOMERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO HTTP://WWW.SAFERCAR.GOV.

---

NHTSA Campaign Number: 05V356000
Manufacturer: HINO MOTORS SALES U.S.A., INC.
Manufacturer Campaign Number: M0020
Manufactured Begin Date: March 1st, 2005
Manufactured End Date: July 31st, 2005
Date of Owner Notification: September 6th, 2006

Defect Summary:
ON CERTAIN CHASSIS AND CABS, THE WHEEL BEARINGS WERE OIL-PACKED ONTO THE FRONT AXLE RATHER THAN GREASE LUBRICATED AS SPECIFIED. IT WAS LATER DETERMINED THAT THE CALIPER MOUNTING BOLTS WERE NOT PROPERLY TORQUED AND THE PROPER END PLAY ADJUSTMENT WAS NOT MADE.

Consequence Summary:
THIS CAN CAUSE THE CALIPER MOUNTING BOLTS TO BECOME LOOSE AND BACK OUT. THE CALIPER COULD BECOME DISCONNECTED FROM THE ROTOR ASSEMBLY WHICH WOULD CAUSE A DECREASE IN BRAKING ABILITY, INCREASING THE RISK OF A CRASH.

Corrective Summary:
DEALERS WILL TORQUE ALL AFFECTED CALIPER MOUNTING BOLTS AND READJUST EACH WHEEL FOR THE PROPER END PLAY ADJUSTMENT. THE RECALL BEGAN ON SEPTEMBER 6, 2005. OWNERS SHOULD CONTACT HINO AT 248-648-6400.

Recall Notes:
HINO RECALL NO. M0020.CUSTOMERS CAN ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236; (TTY: 1-800-424-9153); OR GO TO HTTP://WWW.SAFERCAR.GOV.