1993 Freightliner Fld-120 Recalls

---

NHTSA Campaign Number: 94V010000
Manufacturer: FREIGHTLINER LLC
Manufactured Begin Date: September 1st, 1993
Manufactured End Date: December 1st, 1993
Date of Owner Notification: February 28th, 1994

Defect Summary:
CONTACT MAY OCCUR BETWEEN THE WINDSHIELD WIPER MOTOR AND A HUCK BOLT COLLAR WHICH CAUSES A GEAR WITHIN THE MOTOR TO FRACTURE RESULTING IN COMPLETE FAILURE OF THE WINDSHIELD WIPER SYSTEM.

Consequence Summary:
FAILURE OF THE WINDSHIELD WIPER SYSTEM REDUCES THE OPERATOR'S ROAD VISION IN INCLEMENT WEATHER AND COULD RESULT IN A VEHICLE ACCIDENT.

Corrective Summary:
DEALERS WILL REMOVE AND REPLACE THE WINDSHIELD WIPER MOTOR AND REMOVE THE HUCK BOLT AND REPLACE IT WITH A PULL-TYPE RIVET.

Recall Notes:
SYSTEM: VISUAL SYSTEMS; WINDSHIELD WIPER; MOTOR. VEHICLE DESCRIPTION: MEDIUM DUTY NON-SLEEPER CAB TRUCKS EQUIPPED WITH OPTIONAL ELECTRIC WINDSHIELD WIPERS.NOTE: IF YOUR VEHICLE IS PRESENTED TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND THE REMEDY IS NOT PROVIDED WITHIN A REASONABLE TIME AND FREE OF CHARGE OR THE REMEDY DOES NOT CORRECT THE DEFECT OR NONCOMPLIANCE, PLEASE CONTACT FREIGHTLINER SERVICE CENTER AT 1-503-735-8000. ALSO, CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-800-424-9393.

---

NHTSA Campaign Number: 93V140000
Manufacturer: FREIGHTLINER LLC
Manufactured Begin Date: July 1st, 1993
Manufactured End Date: August 1st, 1993
Date of Owner Notification: October 29th, 1993

Defect Summary:
POWER STEERING HOSE ASSEMBLIES WERE BUILT WITH INCORRECT END FITTINGS. THESE END FITTINGS WERE RATED AT 1250 PSI WORKING PRESSURE AND THE CORRECT END FITTINGS ARE RATED AT 2000 PSI.

Consequence Summary:
THE END FITTINGS COULD FAIL UNDER NORMAL SYSTEM PRESSURE,RESULTING IN LOSS OF POWER STEERING ASSIST AND/OR LEAKAGE OF POWER STEERINGFLUID. LOSS OF POWER STEERING ASSIST MAY RESULT IN LOSS OF STEERING CONTROLWHICH MAY CAUSE AN ACCIDENT. LEAKAGE OF POWER STEERING FLUID MAY RESULT IN AFIRE.

Corrective Summary:
REMOVE AND REPLACE THE POWER STEERING PRESSURE LINE BETWEEN THE POWER STEERING PUMP AND THE STEERING GEAR BOX.

Recall Notes:
SYSTEM: STEERING; POWER ASSIST.VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS.